Offer - Anti-Fraud
Last updated
Was this helpful?
Last updated
Was this helpful?
Go to Offers » Offer-Approved
Click on the Offer name to enter its configuration » Anti-Fraud Tab
Click Spamming Defender is based on an internal algorithm that automatically stops click flooding.
There are 3 modes of the spamming defender
Light - Triggers after 100 spam Clicks are received from the source.
Moderate - Triggers after 50 spam Clicks are received from the source.
Strict Mode - Triggers after 10 spam Clicks are received from the source.
All the traffic coming from specified values will be rejected and will not be redirected to the Offer URL.
All filters of Click block work with AND condition only, which means that if the user has applied multiple filters then, all of the conditions must be satisfied. Each field has a limit of 500 comma-separated values.
Field
Description
IP
To prevent Offers from traffic having specific IP addresses.
aff_id
To prevent Offers from specific Affiliate ID.
sub_aff_id
To prevent Offers from specific Sub-Affiliate ID.
aff_sub1
To prevent Offers from specific Affiliate sub1 value.
aff_sub2
To prevent Offers from specific Affiliate sub2 value.
aff_sub3
To prevent Offers from specific Affiliate sub3 value.
aff_sub4
To prevent Offers from specific Affiliate sub4 value.
aff_sub5
To prevent Offers from specific Affiliate sub5 value.
source
To prevent Offers from specific source value.
referral_domain
To prevent Offers from specific Referral domains value.
With these filters, all Conversions will be validated. When one of these filters triggers, the Conversion will be marked as pending.
Filters can also be applied to blank values. The Conversion will be marked as pending if the value for the added filter is blank. Each field has a limit of 500 comma-separated values in Conversion Validation Filters.
Field
Description
adv_sub1
To validate Adv Sub1 data received in Postback.
adv_sub2
To validate Adv Sub2 data received in Postback.
adv_sub3
To validate Adv Sub3 data received in Postback.
adv_sub4
To validate Adv Sub4 data received in Postback.
adv_sub5
To validate Adv Sub5 data received in Postback.
click_aff_sub1
To validate Affiliate sub1 data received via an Affiliate Tracking link.
click_aff_sub2
To validate Affiliate sub2 data received via an Affiliate Tracking link.
click_aff_sub3
To validate Affiliate sub3 data received via an Affiliate Tracking link.
click_aff_sub4
To validate Affiliate sub4 data received via an Affiliate Tracking link.
click_source
To validate source data received via an Affiliate Tracking link.
click_google_aid
To validate googleaid data received in the Affiliate Tracking link
click_device_id
To validate deviceid data received in the Affiliate Tracking link.
click_android_id
To validate androidid data received in the Affiliate Tracking link.
click_ios_idfa
To validate iosidfa data received in the Affiliate Tracking link.
With the help of this feature, the Admin user can Allow / Block a wide range of IP addresses
Enabling this will limit the number of Clicks from each session to one (rest of the Clicks will be rejected)
Set rule as per the minimum and maximum time difference between the Click and the Conversion Minimum seconds: Set minimum value (for the time difference between the Click and the Conversion) Maximum seconds: Set maximum value (for the time difference between the Click and the Conversion) Action: Accept Conversion / Pending Conversion / Reject Conversion
For example,
Minimum & Maximum If the Conversion is received in less than the minimum time or more than the maximum time, then, it will be recorded as pending.
Only Minimum If the only minimum time is set to 10, then, On receiving conversion after 10 seconds, it will remain as per the decided action.
Only Maximum If the only maximum time is set to 100, then, On receiving conversion within 100 seconds, it will remain to be as per the decided action.
Enabling this will block traffic from the proxy servers.
Block traffic if the traffic doesn't have any Referrer source.
Allow Referral - 302 Redirect - Choosing this option will Pass Referral details with HTTP Status code 302.
Allow Referral - 302 Redirect - (Override Global Settings) - If in the Global setting the Referral is defined as hidden and one wants to pass the referral details from a selected offer this option must be selected.
Hide Referral - 302 Redirect - Choosing this option will hide referral details and 302 HTTP Status code will be passed.
Hide Referral - 200 Redirect - Choosing this option will hide referral details and 200 HTTP Status code will be passed.
Hide Affiliate Referral - 200 Redirect - Choosing this option will Hide Affiliate details and Pass Offer18 user referral details with the status code 200.
